Product ID:EA 9330.3 PART B
MSDS Date:09/29/1989
FSC:8040
NIIN:01-184-7171
Kit Part:Y
MSDS Number: BLJNQ

DEXTER ADHESIVES AND STRUCTURAL MATERIALS

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565
US

Emergency Phone: 415-687-4201 OR 800-424-9300

Info Phone: 415-687-4201

Preparer: SUZANNE FRANZ

Cage: 33564

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

EPOXY RESIN SYSTEM

SILICA

CAS: 7631-86-9

Fraction By Weight: < 10%

OSHA PEL 20 MPPCF

ACGIH TLV: 10 MG/M3

< 10 G/L ESTIMATED

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATERIAL MAY BE CORROSIVE TO EYES AND
VERY IRRITATING TO SKIN. VAPORS MAY BE IRRITATING. MODERATELY TOXIC
BY INGESTION. REPEATED CONTACT MAY CAUSE SENSITIZATION.
Effects of Overexposure:POSSIBLE BURNS TO EYES AND SKIN. IRRITATION AND
POSSIBLE SENSITIZATION TO SKIN.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITATION PERSISTS, SEE PHYSICIAN.

Flash Point Method:TOC
Flash Point:> 300
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.

Handling and Storage Precautions:KEEP COOL IN ACORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (77 F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMENDED CURING SCHEDULE.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Supplemental Safety and Health
*TO BE BONDED. FIALURE TO OBSERVE CAUTION MAY RESULT IN EXCESSIVE HEAT
BUILD-UP WITH THE RELEASE OF TOXIC GASES.

Boiling Pt:B.P. Text:435F,224C
Vapor Pres:<0.01
Vapor Density:7.6
Spec Gravity:1.02
Solubility in Water:100%
Appearance and Odor:CLEAR TO WHITE LIQUID

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENT IN
BATCHES >1 LB TOTAL.DO NOT HEAT MIXED ADHESIVE ABOVE 75F UNLESS
CURING SURFACES*

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.